Final integrated image flash and boot

This is a sanitized board-coordinator record for the final integrated image. It is derived from /tmp/k230-final-image-status.txt and the coordinator’s reviewed flash transcripts. The raw transcripts are deliberately not committed: they can contain host network and device-identifying details. This record does not reproduce private Wi-Fi configuration or inspect credential-file contents.

Artifact and source

• Source revision: 03cbade499827b6dac43d55187e73d90186beb73 (03cbade), supplied by the coordinator and verified as a local Git commit.
• Flashed image: /nix/store/d7r354bnsnffxnwnqblaf3raqvd15190-k230-sd-image.img.
• Booted system: /nix/store/568vf3220mpvdmgjgfnz5ln0qn09934r-nixos-system-nixos-26.11.20260919.20b1ddd.

Flash and boot result

The reviewed flash transcript reports a successful flash.sh exit status of zero after writing 2,308,960,256 bytes. Its end-to-end duration, including the script’s confirmation and final sync, was 183.0 seconds (the script also reports 182.819020085 seconds for the write). The board then booted the stated system.

Full-device readback was intentionally skipped by policy. No home-directory restore was performed.

Sanitized runtime status

The status record reports three expected services active. It reports two credential-containing runtime directories with mode 0700 and the persistent credential file with mode 0600, all owned by UID/GID 0. The Wi-Fi daemon reported wpa_state=COMPLETED, and the public HTTP check returned 200.

These status values establish a successful boot and credential-protected Wi-Fi connection for this board run. They do not disclose, validate, or preserve the network name, credential contents, network address, MAC address, or a raw flash transcript.